IBOMBO SCANDIC is NEW! It is a compact version of the IBOMBO PRS-LV2 model. We created this model based on needs and experiences of the Scandinavian market. Tools can be better protected against severe weather conditions or theft, thanks to the ability to mount a door on solid hinges,
which keep the station closed. We developed an additional coin-opening system like in shopping caddies and part time / limited key lock, e.g. in the closing hours of a store or restaurant. We leave You the choice between these two options.
Its housing is made of thick galvanized or non-rusting steel with powder or thermo plastic coating.
The device can be installed to the ground or a wall with special anchors. The tools are attached
to stainless steel wire ropes. Their length gives the possibility of reaching all bicycle components.
The station is equiped in a hand pump with adapter for all valve types. The construction of the station allows to place Your bicycle on the grip, so You can easily turn the crank while repairing the bike. The sheet metal elements of the device are fastened with anti-theft screws; the patent key will be passed to the owner by our company.
IBOMBO SCANDIC is an advertising area with the surface of about 800 cm2.
Place your logo on the Bike Repair Station at no extra charge!
A new solution in this model is a special pneumatic skateboard grip,
which can make the repair of a skateboard easier. | PAT. PENDING
● galvanized or acid-resistant AISI 304 housing (stainless)
● powder or thermoplastic paint
● AISI 316 fi4 stainless steel wire ropes + swivels
● QR CODE with repair manuals
● stainless anti-theft nuts (AISI 304) with a patent key for mounting the base
● up to 800 cm2 of advertising space
● adjustable spanner 0-32 mm
● phillips screwdriver PH2 + fi4 swivel (AISI 304)
● 5.5 x 1.0 flat screwdriver + fi4 swivel (AISI 304)
● hex key set | 2 | 2.5 | 3 | 4 | 5 | 6 | 8 | + swivel fi4 (AISI 304)
● torx key set |9|10|15|20|25|27|30|40| + swivel fi4 (AISI 304)
● skateboard tools |9/16|1/2|3/8| + swivel fi4 (AISI 304)
● flat wrench 8×10 mm
● flat wrench 13×15 mm
● 3 x tyre levers (plastic with steel core)
● hand pump with pressure up to 10 BAR (Glycerine Manometer “Anti-Fog”)
+ Multi Valve adapter + Compressor hose + Stainless steel piston “Heavy Duty”
+ aluminum (PA6) sealing and lubricating flange
● all high-class components and internationally recognized brands
Basic colour palette – powder paint:
* no possibility to paint in any RAL colour
The thermoplastic coating is the most comprehensive solution on the market. It provides the highest level of resistance against the influence of environmental factors, wear, damage and vandalism. It also requires low conservation.Attention:
Despite all efforts to keep the most accurate color reproduction possible,
our pallets are used for informational purposes only.
The best mapping you can check in samplers.
All rights reserved EUIPO RCD no. 1447197 / PATENT PL 222743